I installed a Terrova 80/US2/i-pilot on the bow last year. You might find that some of the mounting holes provided will extend over the deck once motor is aligned properly for your boat. I had to drill additional holes in the mounting foot. Not sure how it will work with the Q/R bracket. I chose not to use the Q/R bracket because it would much to easy to steal than trying to loosen 6 bolts that are hidden with lock nuts. I also was afraid it might rattle. Depending on the material of your bow, make sure you have enough meat there for the use of riv-nuts. I used thru bolts and backed up with aluminum plate and nyloc nuts. It was worth the extra effort getting under the bow deck. We came down river last year to Tidioute in the dark after loosing the jet. We just used the TM and hit every rock in the river. The shaft and mounting held up great. Hope you enjoy your new motor.