Hi TY I talked to you at the Chicago show about upgrading to a 150 Suzuki on my 618 Ranger.Can you tell me what hole your motor was mounted on and What size is your prop? Also have you tried a Solas 4 Blade prop. Thanks Tim
Hi TY I talked to you at the Chicago show about upgrading to a 150 Suzuki on my 618 Ranger.Can you tell me what hole your motor was mounted on and What size is your prop? Also have you tried a Solas 4 Blade prop. Thanks Tim
The prop is a 14 1/2 X 25. You should get mid 50's for speed with that. I'm not sure what hole the motor is mounted in. The boat is in storage down the road. I'll check the next time I'm down there.
Ty Sennett Muskie Fishing Guide Service
& Sennett Musky Tackle Company
8914 N. Conner Lane
Hayward, WI 54843
Land Phone: 715-462-9403
Cell Phone: 612-839-1227
Web Site: http://www.tysennett.com
Thanks Also do you recommend any Dealers you can PM if you would like
Hayward Power Sports has always been good to me...
If you give me your phone number I will help you out. Or just call me.
Ty Sennett Muskie Fishing Guide Service
& Sennett Musky Tackle Company
8914 N. Conner Lane
Hayward, WI 54843
Land Phone: 715-462-9403
Cell Phone: 612-839-1227
Web Site: http://www.tysennett.com
I talked to Ranger and had two different answers One said Three holes down then another said four Holes down. The problem is the 618VS is discontinued and they don't sell a lot of 150 Suzuki's. If anybody have a 618 VS with a 150 Suzuki I would love to hear from you.The motor gets installed on Fri Thanks
I'll make sure to check it out this afternoon and report back tomorrow.
Ty Sennett Muskie Fishing Guide Service
& Sennett Musky Tackle Company
8914 N. Conner Lane
Hayward, WI 54843
Land Phone: 715-462-9403
Cell Phone: 612-839-1227
Web Site: http://www.tysennett.com
Hey Tim, the Suzuki on my boat is mounted on the second hole from the top. Hope that helps.
Ty Sennett Muskie Fishing Guide Service
& Sennett Musky Tackle Company
8914 N. Conner Lane
Hayward, WI 54843
Land Phone: 715-462-9403
Cell Phone: 612-839-1227
Web Site: http://www.tysennett.com
Thanks Ty I will have them mount the motor on the 2nd Hole down.I am going to try some new 4 blade props and I will let you know how they work out. Thanks again Tim