well boys and girls, I hit a rock on the wisc river last week and I'm in need of repairs. Lower unit is fine, skeg / prop on the other hand is not. I know I can get a new prop, I'm looking to see if it's worth getting the skeg replace/repaired. I only lost about 1" on the tip of the skeg. motor pulles really hard now at full throttle. I'm wondering if the tube assembly got bent or something else is wrong. Not sure. Anyone have any ideas as to why it pulls so hard. You need to have 2 hands on the tiller arm it pulls that hard. Seems to pull to the right. When the motor is down all the way, it looks like it leans out to the right as you look straight at the back of the boat. This tells me that where the motor attatches to the mounting bracket is bent, at least that's what I'm thinking. Any pointers out there anyone, or know anyone that works on these things? Thanks to any and all repleys