www.lakegenevacannery.com

Results 1 to 9 of 9

Thread: any muds

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Question any muds

    John,
    do you have any muds?
    We always like trying a few new musky lakes when were up north.
    There's 2 we would like to try Squaw and Buckskin in western Vilas/Oneida
    just south of Pike&Round off of hwy 70.
    We can't seem to find any public access do you know if there is any and where or if there are any resorts where we could launch are boat?
    Thanks for any info.

  2. #2
    Join Date
    May 2008
    Posts
    952

    Default

    Squaw public access NW corner of lake, take West Squaw Lake Road in... Buckskin take right on Bo-di-lac just before Crickets bar go to public landing on east side of lake.

    Mark
    Last edited by Mark Benson; 07-13-2010 at 10:12 AM.

  3. #3
    Join Date
    Aug 2008
    Location
    vernon hills, illinois
    Posts
    58

    Default buckskin

    i don't know if i would bother going to buckskin, had a winter kill a couple years ago.

  4. #4
    Join Date
    Apr 2010
    Location
    Phillips, WI
    Posts
    189

    Default

    Mark thanks for the help with that, I know what road to turn on but don't know names. As of right now I don't have any muds in the store, I have 2 trucks comming in this week and I will se what I can do. None of the trucks have had any on for a couple of weeks now.
    Ross's Sport Shop & Fishing Guide Service
    John Carlson

    Web Site: http://www.rosssportshop.com

  5. #5

    Default

    Thanks,
    Mark, teenfisher, and John.

    John will give you a call sat. the 17th as were getting close to Phillips to see if you have any muds. One other question do you know anybody that could clean a few northern for us I tend to tear up the fillets trying to get that xtra bone out.
    Thanks again
    Dave

  6. #6
    Join Date
    Aug 2008
    Location
    vernon hills, illinois
    Posts
    58

    Default northern filleting

    if you have trouble trying to get the y-bone out then you should try this. http://www.youtube.com/watch?v=H3-GLr9bTXM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •