www.lakegenevacannery.com

Results 1 to 14 of 14

Thread: trude lake

  1. #1

    Default trude lake

    Hello .. I am going up to the TTF mid July ... I will be staying near Lake of Falls area but on the TTF and I was wondering if access to Trude Lake and Merkle Lake area is present . It has been a few years .. but access to Trude Lake used to be by a Culvert Pipe ( I went about half way in .. I remember that the pipe points downward towards Trude Lake .. I got stuck !! ) . ANd I believe the bridge to Merkle lake was rebuilt . Thanks .. and good luck fishing .

  2. #2
    Join Date
    Sep 2008
    Location
    cedar lake, IN
    Posts
    19

    Default

    yeah, the merkle lake bridge is new and improved, real nice, even smells new. might be able to keep the seats up while passing under!

  3. #3

    Default /

    is it any wider and less rocks there?

    gdi

  4. #4
    Join Date
    Sep 2008
    Location
    cedar lake, IN
    Posts
    19

    Default

    dont think it is wider by much but a little deeper and more head room

  5. #5
    Join Date
    May 2008
    Location
    Green Bay, WI
    Posts
    84

    Default

    Much nicer.. didn't even have to duck!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	merkle.JPG 
Views:	539 
Size:	54.9 KB 
ID:	5688  

  6. #6
    Join Date
    May 2008
    Location
    Lake Geneva, WI
    Posts
    18

    Default

    Anyone know about how deep it is under the bridge now? Wondering if we can make it this year.

  7. #7
    Join Date
    May 2008
    Location
    Turtle-Flambeau Flowage, Butternut,Wisconsin
    Posts
    483

    Default

    We hope to try it with the pontoon tomorrow. With the Flowage 2 feet below pool, it will be interesting. I will let you know on Monday. Scott www.flambeauvista.com

  8. #8
    Join Date
    May 2008
    Location
    Lake Geneva, WI
    Posts
    18

    Default

    Good luck!

    I know my boat drafts 6" on full plane, but no idea what it is at a turtle's pace.

  9. #9
    Join Date
    May 2008
    Location
    Turtle-Flambeau Flowage, Butternut,Wisconsin
    Posts
    483

    Default

    Our Schedule did not permit us to try the bridge passage way. Hopefully next weekend. Scott www.flambeauvista.com

  10. #10
    Join Date
    May 2008
    Location
    Springstead, WI
    Posts
    74

    Default Merkle Bridge Passage

    Had some visitors here over the weekend who took a 17' Lund with 115 hp motor under the Merkle Bridge.

    They did have the motor trimmed up, and moved a couple of people toward the bow of the boat, but they got thru without any problems.

    Tight Lines,

    Tom502

  11. #11
    Join Date
    May 2008
    Location
    Lake Geneva, WI
    Posts
    18

    Default

    Thanks! Sounds like it'll work, albeit, with some of our own weight distribution as well.

  12. #12
    Join Date
    Jul 2008
    Posts
    18

    Default

    Quote Originally Posted by ski2313 View Post
    Much nicer.. didn't even have to duck!
    Holy Cow!! That is very cool!! No more taking my pedestal seats down to get through! Yipppeeeee!
    KEEPFISHN4FUN

  13. #13

    Default My 2 Cents

    The new bridge may be great for the truck traffic but the boats give me the old bridge.

    Went through it last week with the water as low as it was it wasn't that great. There are 2 big rocks/small boulders in the water just off center of the path. If you don't watch you could hit them.

    For all the money thats was spent on the bridge you think they would have done a better job. It would have been very easy to make it wider and easier to go through at the time of construction. As far as depth no change the water level will be that factor. It almost seemed that it wasn't as deep under the bridge do to sand filling in the hole that was there.

    Maybe someone will take the time to clear the path way once the water gets lower.

    I think too that some type of sides like the old bridge had made it easier to get through. If the boat swings now your into rocks befoer you bumped some old wood.


    Just my 2 cents.

    gdi

  14. #14

    Default

    its very shallow right now esp. keep the motor up and hope you dont have a bad wind

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •